October 2016 operating session


Above: T377 and VR TN 4, with Darren at the controls, has just completed shunting and loading at Southern Aggregates. The driver will soon head down to the phone box and seek permission from Train Control to continue to head east. Darren commented that in the many sessions he has attended, this was the first occasion he actually got to “work” Southern Aggregates!

With a few apologies received, a crew of six participated in the October 2016 operating session on the Border District. This was the second month that the revised “flexible” timetable was utilised and it again proved very successful in accommodating a fluctuation in the number of operators. The afternoon was a thoroughly enjoyable one, with a focus on slower and more immersive operations, but some great banter and conversation as well.

Below: In an unusual (but welcomed!) rostering move from the Tatiara Downs Loco Depot, “Big Mikado” 730 is providing the power for SAR TN 147/148 today. Craig is bringing the Webb steamer to a halt at Border Junction for a “take outs” stop, before continuing westwards to Tatiara Downs. A centenary car can be seen to the rear of the consist – chartered by a local football club for an end of season trip and marshalled inside the Goods Brake.



Above: Paul is looking after Y169 at Nankiva – with VR TN 17 goods terminating and VR TN 26 goods originating. There is plenty of shunting to do here, but Paul seemed to thoroughly enjoy himself … and it was great to watch a different operator go about tackling this task.

Roles for the afternoon saw a few changes to what might be considered the “usual”, with many operators trying a different role (or at least, a role with different workings) for the first time. Iain put his hand up to work Tatiara Downs – brave, but also opening up the SAR Jameston branch gig for someone else – which Craig gladly took. Brendan ably supported Iain at Tatiara Downs (master and apprentice … or sheriff and deputy?), while Paul and Darren each took on the two VR crew jobs. The remaining SAR/VR crew gig was shared between Brendan, Craig and myself – with a couple of trains cancelled – and I also took on the Train Control position. It was rewarding to see and feel the sense of enjoyment from the crew – thanks to all who attended!

Below: A busy few moments at Nankiva. As Paul continues to break up VR TN 17 goods and make up VR TN 26 goods in the yard, a railmotor replacement working – VR TN 42 – arrives at the platform. Darren is in charge of this train, headed by T357, which was one of the “wrinkles” in the session, with the loco hauled train standing in for the “failed” Walkers 280HP railmotor.



Above: … and an even busier few moments at Tatiara Downs! Iain and Brendan have clearly been a model of efficiency, with Road 4 being “empty” in this shot. SAR Alco 950 is at the head of the empty down “Paper Jet” (SAR TN 185) in Road 1, while the trailing Goods Brake of SAR TN 312 roadside goods can be seen in the foreground of Road 2. VR blue and gold B67 stands at the head of VR TN 880 fast goods in Road 3, while mustard pot 836 – the TD shunter for the afternoon – goes about breaking up and shunting loading in Road 5. The session showed that two operators at Tatiara Downs certainly helps to make life a little easier …

The October session saw – for the first time and at last – the full utilisation of the completed signalling system on the Border District. Dwarf and low speed signals were installed and operational at Nankiva, while “outer/repeater home” signals for both Tatiara Downs and Nankiva and “departure” signals for Edenhope and Kybybolite were all lit. There are still a few gremlins to sort out – “yellow” aspects that perhaps look more like “red” (especially to some operators, hey Craig?!) and a few lights on panels that need sorting – but I was really please – and proud – to have finally hosted a fully signalled session. Even more impressive was the manner in which operators used and followed these signals!

Below: Craig eases 950 and SAR TN 185 empty “Paper Jet” through the crossovers at Border Junction, leaving the mainline to head down the branch to Jameston. Upon arrival, the OBfs loaded with soda ash and bogie opens with pulp paper will be shunted off, and loaded louvre vans full of toilet rolls for Adelaide, Sydney and Perth will replace the empty louvre vans being conveyed here.



Above: Not long after the passage of 950 and SAR TN 185, Paul is in charge of B67 and VR TN 880 fast goods. On this day, VR TN 18 roadside goods has been cancelled, so VR TN 880 includes loading that would usually be conveyed by this working. At Nankiva, Paul will drop off the first two wagons – an empty louvre van for loading of vegetables (for Central Markets in Adelaide) and an empty open wagon for loading of grain (for the Mill at Tatiara Downs).

The session did, of course, provide for a few light hearted moments. Iain managed to achieve at least one “Brendan” – believing there is more track available than there actually is … so perhaps this is a “Tatiara Downs” thing? Craig managed the only “Craig” of the session , leaving behind a card for the CD van that was added to SAR TN 166 at Tatiara Downs (the TD crew could share a little of the blame – but ultimate responsibility falls to the driver for not “checking the cards/brakes” before departure). Craig also featured in the two biggest highlights. The first, perhaps being too excited about having a steamer to run, saw him not only left the Goods Brake of his train behind, but then reversed, at speed, through a red signal to go back and collect it! The second saw Craig fall victim to the “terrible two” at Tatiara Downs – who, having completed their shunting and work for the session, uncoupled half of Craig’s final working as it passed through the station – with Craig not realising this until his arrival at Kybybolite!

Ten sessions have been undertaken so far on the Border District this year – each one building and improving on the previous. As always, my sincere thanks and appreciation to those friends that come along, operate and contribute to making the layout and operations what they are!

Below: Two of the final workings for the session can be seen at Nankiva. X33 and B75 are powering VR TN 834 “Overland” towards Melbourne, with Paul at the controls and enjoying the “big wheel” assignment. T335 and T332 are in Darren’s capable hands – shunting  loaded grain wagons before following the “Overland” – as VR TN P4, bound for Portland and export.



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s